Custom Blend Thin-Set Mortar
Economical formula with good bond strengths for most tile projects and is recommended for floor installations. Formulated of Portland cement, for interior and exterior use. Use to bond vitreous, semi-vitreous or absorptive tile, ceramic, mosaic, quarry, pavers, cement, porcelain, brick and mini-brick, precast Terrazzo, and natural stone to concrete substrates, masonry, gypsum wallboard, wonderboard, backer boards, exterior grade plywood, existing ceramic tile, asbestos-free vinyl flooring, and plastic laminates. Some applications may require using acrylic mortar Admix. Not recommended for use over hardwood, luan, plywood, parquet, particle board, cushion, sponge-back, or asbestos containing vinyl flooring, metal, fiberglass and OSB panels. Approximately 85 to 95 sq. ft. per 50 lb. when applied with a 1/4" x 1/4" notched trowel. Exceeds ANSIA118.1 and A118.4 specifications. Allow to cure for a minimum of 24 hours before grouting or light traffic. Clean up immediately with water. 50 lb. bag.