EMAX 80 Gal. Stationary 175 psi 10 HP Air Compressor with Air Silencer

Industrial 10 HP 2 Stage V4 1 Phase horizontal 80 Gallon Piston Air Compressor is designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of our 10hp 2 Stage Emax compressors is our pump. We start with a solid cast iron crankcase. Pump also features a precision balanced solid cast iron crankshaft with Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth and efficient operation with less drag and less energy use. Unit has a prewired condor starter and pressure switch built into one. Top quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower. 100 percent brass check valves with Teflon Seating. All safety valves are 100 percent brass and comply to ASME code. Valves are preset and sealed for correct settings. In the event that the compressor would not turn off, our safety valves open keeping compressor from building too high of a pressure level in the tank. Top quality plumbing fittings are used to maintain proper sealing when connected to the tank. High quality 100 percent brass ball valves are used for turning air on and off from the air receiver. Extended tank water drain pipe plumbed out the front of the unit with a 1/4 In. ball valve handle for easy tank draining. We use taper lock style 2-groove pulleys (not single groove). We also use dual 2-groove, B-Style belts to drive our pumps. Dual belts ensure long belt life and yield low vibration which makes for smoother, more quiet operation because the dual belts do not have to be as tight as with a single belt setup. The tighter the belts (as with a single belt setup), the more load on the compressor pump and motor bearings which decreases the life of both. Our taper lock pulleys are much better than a fixed bore pulley with a set screw. A taper lock design will lock the pulley in position to the motor shaft allowing it not to loosen or move on the motor shaft. 5 Year Warranty.