Skip to Main Content
Back to Navigation

Lesso 2 In.x 2 In. x 1-1/2 In. Reducing Wye

Model #LP601-251BItem #C93DJSUPC 00848154062297
Shop Lesso
Lesso 2 In.x 2 In. x 1-1/2 In. Reducing Wye

+ 1 more

Lesso 2 In.x 2 In. x 1-1/2 In. Reducing Wye
Lesso 2 In.x 2 In. x 1-1/2 In. Reducing Wye
Tap to view
In-store price may vary. Not all products available at all stores.

    Product overview

    Plastic fitting used in drain, waste and vent systems. White
    • Allows branching of PVC DWV piping at a precise angle for smooth flow distribution
    MaterialPVC
    Fitting Size 12 In.
    Fitting TypeReducing Wye
    BrandLesso
    UPC00848154062297
    Product typePVC Wye
    • Buying Guides
    • Related Product Articles
    • California Prop-65 WarningWARNING:

      ATTENTION INSTALLERS: Plastic piping systems shall be engineered and installed in accordance with established standards and procedures. Suitability for the intended service application MUST be determined prior to installation. SOLVENT WELD CONNECTION: Use quality grade of primers and cements formulated for the type of connection, with correct applicator size. Read and follow manufacturers application instructions. THREADED CONNECTIONS: Use quality grade of thread sealant approved for plastics. CAUTION: Some sealant compounds may cause stress cracking. 1 to 2 turns beyond finger tight is generally sufficient for plastic threaded connections. Do not over tighten. NOT FOR USE WITH COMPRESSED AIR OR GAS. This Product Can Expose You To Chemicals Including Titanium Dioxide (ONLY When Airborne, As Unbound Particles Of Respirable Size), Which Are Known To The State Of California To Cause Cancer. For more information go to www.p65warnings.ca.gov

      WARNING:

      ATTENTION INSTALLERS: Plastic piping systems shall be engineered and installed in accordance with established standards and procedures. Suitability for the intended service application MUST be determined prior to installation. SOLVENT WELD CONNECTION: Use quality grade of primers and cements formulated for the type of connection, with correct applicator size. Read and follow manufacturers application instructions. THREADED CONNECTIONS: Use quality grade of thread sealant approved for plastics. CAUTION: Some sealant compounds may cause stress cracking. 1 to 2 turns beyond finger tight is generally sufficient for plastic threaded connections. Do not over tighten. NOT FOR USE WITH COMPRESSED AIR OR GAS. This Product Can Expose You To Chemicals Including Titanium Dioxide (ONLY When Airborne, As Unbound Particles Of Respirable Size), Which Are Known To The State Of California To Cause Cancer. For more information go to www.p65warnings.ca.gov

    • Request Safety Data Sheet (SDS)