Skip to Main Content
Back to Navigation

Lesso 1-1/2 In. Vent Elbow

Model #LP331-015BItem #TDZSV4UPC 00848154061474
Tap to view
In-store price may vary. Not all products available at all stores.

    Product overview

    Plastic fitting used in drain, waste and vent systems. White
    • Provides a change in direction for PVC DWV piping connections
    MaterialPVC
    TypeDWV
    Fitting Size 11-1/2 In.
    Fitting TypeVent Ell
    BrandLesso
    UPC00848154061474
    Product typePVC Elbow
    • Buying Guides
    • Related Product Articles
    • WARNING:

      ATTENTION INSTALLERS: Plastic piping systems shall be engineered and installed in accordance with established standards and procedures. Suitability for the intended service application MUST be determined prior to installation. SOLVENT WELD CONNECTION: Use quality grade of primers and cements formulated for the type of connection, with correct applicator size. Read and follow manufacturers application instructions. THREADED CONNECTIONS: Use quality grade of thread sealant approved for plastics. CAUTION: Some sealant compounds may cause stress cracking. 1 to 2 turns beyond finger tight is generally sufficient for plastic threaded connections. Do not over tighten. NOT FOR USE WITH COMPRESSED AIR OR GAS. This Product Can Expose You To Chemicals Including Titanium Dioxide (ONLY When Airborne, As Unbound Particles Of Respirable Size), Which Are Known To The State Of California To Cause Cancer. For more information go to www.p65warnings.ca.gov

    • Request Safety Data Sheet (SDS)