Maximum strength wax remover. A powerful combination of ingredients that removes all waxes, styrenes, acrylic and metal cross linked polymers, even old heavy layers including spray buffed and frequently burnished super tough urethane fortified products. Super Strip attacks floor coatings on contact. Alkaline boosters, emulsifiers, and super active wetting agents penetrate quickly to liquify every trace of finish and soil build up. Stripper solution and emulsified dirt and finish can be easily picked up with a wet vac or mop. Note: This product is a powerful stripper for use on floors only. It is not recommended for general-purpose cleaning of walls, woodwork, etc., nor is it intended for cleaning floors without removing the finish. May be harmful or fatal if swallowed. May cause skin and eye irritation. Contains Sodium Metasilicate and Isopropyl Alcohol. If swallowed call a physician immediately. In case of contact with skin or eyes flush well with water for 15 minutes. If irritation persists, call a physician. Keep Out Of Reach Of Children. 1 Gallon (3.785 Liters). Directions For Use: 1. Dilute Super Strip 1-10 with hot water. 2. Mop or spray solution onto floor. 3. Allow solution to penetrate for several minutes. Do Not Allow Stripper To Dry On Floor. Add more solution if necessary to keep floor thoroughly wet. Scrub with a floor machine equipped with a stripping pad. Keep floor wet. Do not allow loosened finish to dry on floor. Pick up solution and liquified finish with a wet vac or mop. Flood rinse with clear water and pick up with wet vac or mop. Follow immediately with a second cold water rinse. Allow floor to dry thoroughly before applying floor finish.