Drylok Gray Latex Masonry Waterproofer, 1 Gal.
Model #773377Item #794240 UPC 00079941276133
Tap to view
Product overview
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, swimming pools, bird baths, fish ponds, and foundations. Stops water under pressure up to 10 P.S.I. per sq. in. That's greater than a column of water 22' high. Chalky (efflorescence) deposits must be removed by etching the surface. Alkali-resistant and may be applied on slightly damp surfaces below ground, but best results are obtained on dry surfaces. Low odor formulation is VOC/VOS compliant and cleans up with soap and water. Applies easily with brush or roller. Covers approximately 75 to 125 sq. ft. per gallon. Latex based Drylok is backed by a 10 year manufacturer warranty.
- Penetrates pores in surface, bonding to the masonry and creating an impenetrable barrier
- Ready-to-use low odor formula needs no premixing
- Breathable film will not trap moisture in the masonry
- Use 2-coats to ensure maximum waterproof defense
- Dries to the touch in just 90 minutes - recoat in 2 hours - full cure in 24 hours
Specifications
| Application | Ready Mix |
| Interior/Exterior | Interior/Exterior |
| Container Size | 1 Gal. |
| Base Material | Latex |
| Coverage Area (Sq. Ft.) | 125 |
| Brand | Drylok |
| UPC | 00079941276133 |
| Product type | Masonry Waterproofer |
Product manuals and information
- Buying Guides
- Related Product Articles
- California Prop-65 WarningWARNING:
Reproductive Harm www.p65warnings.ca.gov.
WARNING:Reproductive Harm www.p65warnings.ca.gov.
- Request Safety Data Sheet (SDS)