Skip to Main Content
Back to Navigation

Lesso 1/2 In. 90 Deg Elbow (SOC SOC)

Model #806-005B
Item #95VE4B
UPC 00848154071442
Shop Lesso
Lesso 1/2 In. 90 Deg Elbow (SOC SOC)

+ 1 more

Lesso 1/2 In. 90 Deg Elbow (SOC SOC)
Lesso 1/2 In. 90 Deg Elbow (SOC SOC)
Tap to view
In-store price may vary. Not all products available at all stores.

    Product overview

    Plastic fitting used in pressure and water distribution systems.
    • Engineered for use in pressure and high-demand plumbing systems
    MaterialPVC
    TypeElbow
    Schedule80
    Fitting Size 11/2 In.
    Fitting Size 21/2 In.
    Connection Type 1SOC
    Connection Type 2SOC
    BrandLesso
    UPC00848154071442
    Product typePVC Coupling
    • Buying Guides
    • Related Product Articles
    • California Prop-65 WarningWARNING:

      ATTENTION INSTALLERS: Plastic piping systems shall be engineered and installed in accordance with established standards and procedures. Suitability for the intended service application MUST be determined prior to installation. SOLVENT WELD CONNECTION: Use quality grade of primers and cements formulated for the type of connection, with correct applicator size. Read and follow manufacturers application instructions. THREADED CONNECTIONS: Use quality grade of thread sealant approved for plastics. CAUTION: Some sealant compounds may cause stress cracking. 1 to 2 turns beyond finger tight is generally sufficient for plastic threaded connections. Do not over tighten. NOT FOR USE WITH COMPRESSED AIR OR GAS. This Product Can Expose You To Chemicals Including Titanium Dioxide (ONLY When Airborne, As Unbound Particles Of Respirable Size), Which Are Known To The State Of California To Cause Cancer. For more information go to www.p65warnings.ca.gov

      WARNING:

      ATTENTION INSTALLERS: Plastic piping systems shall be engineered and installed in accordance with established standards and procedures. Suitability for the intended service application MUST be determined prior to installation. SOLVENT WELD CONNECTION: Use quality grade of primers and cements formulated for the type of connection, with correct applicator size. Read and follow manufacturers application instructions. THREADED CONNECTIONS: Use quality grade of thread sealant approved for plastics. CAUTION: Some sealant compounds may cause stress cracking. 1 to 2 turns beyond finger tight is generally sufficient for plastic threaded connections. Do not over tighten. NOT FOR USE WITH COMPRESSED AIR OR GAS. This Product Can Expose You To Chemicals Including Titanium Dioxide (ONLY When Airborne, As Unbound Particles Of Respirable Size), Which Are Known To The State Of California To Cause Cancer. For more information go to www.p65warnings.ca.gov

    • Request Safety Data Sheet (SDS)