Benjamin Moore Corotech 100% Solids Epoxy Pre-Primer Catalyst, 1 Qt.
Model #V155.90.4 UPC 00090548230427
Item #RTNYK3
Tap to view
Product overview
100% Solids Epoxy Pre-Primer is formulated for use on both steel and masonry. For rusted steel, the penetrating properties and extended dry time of this two-component epoxy seal crevices and other imperfections, promoting better adhesion for subsequent coats. For prepared masonry surfaces, V155 penetrates and seals, providing an excellent foundation for subsequent coats of Corotech epoxy floor coatings. The unique, 100% solids formula of V155 forms a sealed epoxy barrier that inhibits future corrosion. This is a two-component product that requires 3 parts of the proper "A" component mixed with 1 part of part "B" catalyst. The components are already premeasured to the proper mix ratio. No measuring required. Do not mix partial kits.
- Low viscosity easily fills voids and crevices
- Extended cure time allows maximum penetration
- Does not shrink - eliminates craters
- Chemical and fume resistant
- Seals previously coated concrete, masonry, and galvanized metal
Specifications
| Color | Catalyst |
| Color Family | Gray |
| Interior/Exterior | Interior/Exterior |
| Sheen | Semi-Gloss |
| Time Before Recoating | 12 Hr. |
| Clean-Up | Corotech V704 |
| Application | Roller, Brush, or Spray |
| Dry To Touch | 12 Hr. |
| Container Size | 1 Qt. |
| Base Material | Two Component Epoxy |
| Brand | Benjamin Moore |
| UPC | 00090548230427 |
| Product type | Floor Coating |